Sign In | Join Free | My hardware-wholesale.com
China Guangzhou Yuanxing Industrial Co., Ltd. logo
Guangzhou Yuanxing Industrial Co., Ltd.
Guangzhou Yuanxing Industrial Co., Ltd. Professional AP And Brembo Brake Caliper Disc Pad Kit
Active Member

4 Years

Home > Cast Iron Brake Disc >

Car Parts 2pcs Brake Disc 410*36mm Drilled Slot Plating

Guangzhou Yuanxing Industrial Co., Ltd.
Contact Now

Car Parts 2pcs Brake Disc 410*36mm Drilled Slot Plating

  • 1
  • 2
  • 3

Brand Name : Jekit

Model Number : brake disc

Place of Origin : china

MOQ : 1 set

Price : Factory direct price

Payment Terms : T/T, Western Union,paypal

Supply Ability : 99pair

Delivery Time : 5-8 work days

Packaging Details : 40*40*20cm

Product Name : Car brake disc

Disc Size : 410*36mm

Disc Material : Grey Cast Iron TH250

Fit For : 22''

Type : Drilled slot

Shape : 2 pcs disc

Fit For Wheel : Front Wheel

Application : Car brake parts

Contact Now

Car Brake Parts 2pcs Brake Disc 410*36mm Drilled Slot Plating

brake structure
Disc brake discs (discs) are divided into solid discs (single discs) and air duct discs (double discs). The solid disc type is easier for us to understand. To put it bluntly, it is solid. Vented Disc, as the name suggests, has the function of ventilation. From the outside, it has many holes on the circumference leading to the center of the circle, called air ducts. The air convection at the air duct is used by the car to achieve the purpose of heat dissipation, which is much better than the solid heat dissipation effect. Most of the cars are front-drive, and the frequency meter of the front disc is worn more, so the front air duct disc and the rear solid disc (single disc) are used. Of course, there are also air duct discs at the front and rear, but the manufacturing cost is not too bad.
The first picture in this article is a perforated scribing disc. Its braking performance and heat dissipation have been improved to a certain extent, but it has a large wear on the brake pads. DIY modified brake disc, friendly reminder: 1. The material of the disc must be good enough, without too many defects that affect the strength, such as large pores, sand holes, and shrinkage porosity is not allowed. 2. The spacing and size distribution of the holes, etc., because one more hole is drilled, the strength of the place is slightly weaker. If the disk breaks, the consequences are unimaginable. 3. Symmetrical equalization. If the balance of the disc is seriously damaged, it will have a certain impact on the spindle during driving. 3. This is a hard project, please be cautious. Without professional guidance, it is best not to act recklessly.
Brake discs with punched lines, also known as "high-speed discs" or "modified discs", are generally assembled in high-performance vehicles, such as racing cars, sports cars or sports cars. With the rise of the modification wind in the domestic automobile industry in recent years, many riders do DIY by themselves, obtain punched and scribed brake discs from various channels, and then change them by themselves. The perforated and scribed brake disc is a double-edged sword. Its advantages and disadvantages coexist, but the wear of this type of brake disc will increase the wear of the brake pads, and the material and processing requirements of the brake disc are also relatively high. Many small companies pretend to be brands from European, Taiwanese, Japanese and other manufacturers to produce high imitation brake discs, which requires many players who like DIY to pay more attention.
The brake disc is a very important part in the braking system. A good brake disc brakes stably, without noise and vibration. Many DIY players do not have certain professional knowledge and do not replace the brake discs by themselves, because the original brake discs have been tested by many professional engineers and can fully withstand the braking force of their own cars. Sometimes after replacing the punched and marked brake disc, the braking effect is not necessarily better than the original ordinary disc. Therefore, as for the total parts and components related to safety, it is necessary for all riders to be cautious when modifying.
In addition, there is a disc that integrates HUB, ABS ring, assembly bolts, bearing skins, etc., generally called bearing disc, and is used for larger models such as trucks.
Drum brakes have a cast iron piece shaped like a tambourine, called a drum, which is fixed to the tire and rotates at the same speed. Disc brakes have the advantages of better reactivity and stability, better heat dissipation, and easy replacement. The cost of drum brakes is lower and the absolute braking force is higher, and they are more used in the rear wheels of small cars. However, its wear rate is high, so at the same time the overall cost is high.

Product parameter

Product Name Car brake disc
Disc Size 410*36mm
Type Drilled slot
Fit For 22''
Shape 2 pcs disc
Quality 100% Tested
Application Car brake parts

reference picture

Car Parts 2pcs Brake Disc 410*36mm Drilled Slot PlatingCar Parts 2pcs Brake Disc 410*36mm Drilled Slot PlatingCar Parts 2pcs Brake Disc 410*36mm Drilled Slot Plating


Product Tags:

2pcs Brake Disc

      

Drilled Slot Plating Brake Disc

      

TH250 Cast Iron Brake Disc

      
China Car Parts 2pcs Brake Disc 410*36mm Drilled Slot Plating wholesale

Car Parts 2pcs Brake Disc 410*36mm Drilled Slot Plating Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Guangzhou Yuanxing Industrial Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)